ES x Pixie Kit | 24oz

Acrylic Snowglobe

​

How to Assemble Your ES x Pixie Kit ✨

🛠 Tools You’ll Need

• Tweezers or a weeding tool / weeding pen

• Transfer tape

• Squeegee

• Cup or tumbler

​

📦 What’s in Your Kit

• A – Body piece

• B – Decal

• C – Lid piece

• D – Top and Bottom pinstripes

• E – Outer V pinstripes

• F – Lid pinstripe

• G – Inner V pinstripes (choose patterned or plain)

​

📝 Step-by-Step Instructions

1. Weeding Your Vinyl

   • Your kit arrives unweeded.

   • Use tweezers or a weeding pen to remove the top vinyl layer, leaving pieces A–H behind.  If you are unsure of what to leave behind, please refer to the weeding image that is Green on the item listing.

   • Check your decal (B) in case it has any parts needing weeded (see image for examples – typical spots are between letters or elements) and need these.

   • If your kit is a Peekaboo kit, also weed out the inner sections of the peekaboo design (see image for example).

2. Applying the Body Piece (A)

   • Apply transfer tape over A to lift it cleanly.

   • Line it up and carefully place on your cup.

   • Smooth it down with a squeegee to remove bubbles.

   • You can peel back and reposition if needed — just avoid stretching the vinyl.

   • Don’t stress about being a little off — pinstripes will help cover small imperfections.

3. Adding the Pinstripes

   • Step 1: D → Wrap these around the top and bottom of the cup.

   • Step 2: E → Apply these along the outer edges of the V split.

   • Step 3: G or H → Apply these along the inner edges of the V split.

     • Choose patterned or plain for a little extra customisation.

   • Step 4: F → Wrap this around the edge of your lid.

4. Finishing Touches

   • Apply B (Decal) and C (Lid) as your final decorative details.

​

✨ Done! Your ES x Pixie cup is now ready to shine ✨